Locate the reset button on an electric scooter

Electric scooter acceptance has been increasing enormously. The main reasons behind this are its mainly fun driving, an alternative means of transport to walking, and its high-speed pace that attracts the user most. As we all are aware every electronic equipment may face certain issues. If your e-scooter is not working properly, the one solution is to reset the electric scooter by pressing the reset button. Before that you should know “Where is the reset button on an electric scooter?” 

The word”re-set” means to set, adjust, or fix something in a new or different way. It is a feature that helps your electric scooter to optimal functioning by restoring default settings or resolving minor temporary glitches. There are two main functions of the reset button on an electric scooter:

Hardware reset:

Hardware reset is also well known as factory reset. Its main work is to reset the device back to its factory settings. It erases data, settings, applications, and customizations. It cleans and returns to its basic state.

Software reset : 

Software reset takes place when you press the reset button on your device, its function is to reboot the software and operating system without affecting any hardware configuration. It resolves many glitches without losing any user information and data.

Follow these easy steps to reset your electric scooter:

Safety first:

Always wear protective gloves to ensure that you are safe. Make sure that your electric scooter is turned off. Place your vehicle on a flat surface to prevent it from falling.

Locate the reset button:

The reset button on an electric scooter varies from model to model. In some brands, it is on the handlebar dashboard, near the charging port, or underneath the scooter’s deck, close to the battery compartment. 

Note : It is always advisible to read the manual fisrt as it often provides specific instructions for resetting the power button. Different models may have different procedure.

Disconnect the battery:

To reset the electric scooter, you may need to disconnect the battery. This will work only if the electric scooter has a removable battery. Follow the steps:

1. The battery compartment is located under the footboard of the vehicle.
2. Open the cover carefully using a screwdriver.
3. Disconnect the battery by removing the connectors, but be careful not to damage the wires.

Note : Please wait for atleat 5 to 10 minutes after disconnecting the battery. It helps the electric scooter to discharge any remaining power in it.

Reconnect the battery:

You need to attach the connectors back, ensuring all the connections are tight and secure. Close the battery compartment by using the screwdriver.

Process of resetting the button:

1. To start an electric scooter you must turn it off and if not, press the power key and hold it until the display is blacked out.
2. With the help of both hands, at the same time, you need to press the power button, throttle, and brake.
3. Wait for a few seconds in this position.
4. You will hear a beeping sound in a short while from the e-scooter.
5. You release all the buttons including the brake as the reset is completed.
6. Bluetooth and other settings are reset and your e-scooter is ready to be paired and connected to your smartphone.
7. Take a test ride and check if the e-scooter is responsive to its throttle, brake, and other functions.
8. It will also be advisable to consult your e-scooter manual for specific instructions.
9. If you have any unsolved issues with your electric scooter contact the manufacturer for repair.

 

Reasons for resetting :

1. Quick drainage of battery.
2. Slow acceleration.
3. Throttle issue.
4. Any Glitch.
5. Software update.

Note : Be aware as in some cases your warranty may affect. Check you user manual before doing anything or if you are unsure.

FAQ

1. Is it safe to reset the electric scooter?

Ans: Yes, it is safe if you follow the proper steps and take the necessary precautions while resetting the electric scooter. 

    2. How long does resetting take place?

Ans: In about 10 to 15 minutes the whole process of resetting takes place including the discharge of the electric scooter.

    3. Why should I reset my electric scooter?

Ans: Resetting the electric scooter resolves minor software glitches, restores the default settings, and improves performance.

    4. Will resetting delete the electric scooter’s data?

Ans: Yes, resetting erases custom settings. For example, if you have adjusted speed settings or connected the scooter to your mobile application. It will be changed to its original manufacturer settings.

Conclusion:

Every user needs to know how to reset the e-scooter. The technique mentioned in the article will be useful to assist you in resolving minor issues yourself. Always know electric scooter safety tips to help ensure a safe and enjoyable ride. If you still face difficulty do not hesitate to take the help of a professional.